These last years, the CWA Board assimilated what was archived from many old Carmageddon forums, including the whole of the Official Carmageddon.com Forums.
If you wish to merge any previous account you might have had with your new or existing CWA account, don't hesitate to reach out to us !
Flummery v0.3.8.9
[Tool] Flummery v0.3.7.5
Wh...what about raytracing, have you never wanted to taste the wonderful photorealism that a properly-lit raytraced scene gives?
[Tool] Flummery v0.3.7.5
He already mentioned that.fatcat wrote:Did you know that you can render textures to have ambient occlusion on them to look more realistic ingame from the get go?Wh...what about raytracing, have you never wanted to taste the wonderful photorealism that a properly-lit raytraced scene gives?
Preference is preference.'80s Time Warp wrote:3dsmax then steps in to fill in the gaps that Zmod can't fill (vertex colours, lighting, rendering/AO/Baking, etc)
- '80s Time Warp
- Road Warrior
- Posts: 1257
- Joined: Wed Aug 03, 2011 8:30 pm
[Tool] Flummery v0.3.7.5
As I said previously, 3dsMax steps in to fill the blanks/gaps with lighting, rendering, AO etc.Fair enough but man, how will you make a complex-enough mesh for crushing to look good, by making hundreds upon hundreds of tiny dots that you painstakingly align? Do you know that other modelling suites can do smooth shapes much faster and more efficiently? What about using a brush tool to flatten smooth surfaces out, this doesnt sound good to you? You'd really rather copy a dot, place it, then fill in a "single" triangle?
You don't create meshes in Zmod only through drawing splines in the shape of a single triangle, then filling it and copying it over and over, that is ghastly, inefficient and not how I do it. Start with a primitive (usually a plane or box), then cut in the geometry required. It's great for fundamental work and that's it. I'm not claiming that it's great for anything else, it's a simple tool, I use it to the peak of it's effectiveness, and then move over to max to polish off (SG, AO, etc).
With regards to doubts over mesh complexity, I direct you to everything I've ever built. I put the vert's exactly where I want them to be to define the shape & make at exactly as smooth as I want, I don't like the idea of letting an automated process do that.
As I said previously, "3dsmax then steps in to fill in the gaps that Zmod can't fill (vertex colours, lighting, rendering/AO/Baking, etc)."Did you know that quads exist and that they're magnificient? Did you know that you can render textures to have ambient occlusion on them to look more realistic ingame from the get go?Wh...what about raytracing, have you never wanted to taste the wonderful photorealism that a properly-lit raytraced scene gives? Zmod cant really do those things...
As for quads, yes I know they exist and with most complex shapes - you're likely to end up with a triangle or two somewhere, and from my POV, there's no point of building a model out of both.
As Alex has Ninja posted me, It's just my preference. :)
Twitter Manifestation. - Mods for Max Damage.
Please do not use my old/deadname.
[Tool] Flummery v0.3.7.5
FBX Import: Correctly imports UVs, handles FBX files from Visual Studio 2013
Tools > General > TDX Convertor: Various improvements
Improved handling of UV2 channel. Fixes issues with certain materials.
Save As... > Carmageddon Reincarnation > Vehicle: Dialog tidied up and fixed the generated vehicle_setup.cfg file
Added support for different node types. While this is mostly under-the-hood at the moment there is a fancy Light widget to fiddle with stock lights.
Vastly reduced memory consumption when loading levels.
Correctly generate tri-strips when saving MDL files
Overhauled the right-hand panel to use contextual widgets. These can be rolled-up by clicking the headers.
Far too many minor improvements to list
Repackaged the exe so you don't have to worry about all those weird dlls.
- Gravedrinker
- hit n run
- Posts: 215
- Joined: Tue Mar 04, 2014 6:54 pm
[Tool] Flummery v0.3.7.5
Changelog:
* FBX Import: Materials are no longer created multiple times
* FBX Export: Meshes following null nodes now export as expected
* FBX Export: Null nodes now export at all
* MDL Export: Meshes are split into MaterialGroups, optimised and tested for non-manifold properties automatically
* Object > Rename: No longer causes odd node names in the overview
* Object > Data > Add/Change Type: You can now change node types on the fly
* Save as > Vehicle: Improvements to the look and feel of this dialog
[Tool] Flummery v0.3.7.5
Now I am going to say that statement throughout the whole game "Take it all baby" "Do I make you feel randy ?" "There goes something up your tail pipe"AlexTSK wrote:Smashing baby!
"* FBX Export: Null nodes now export at all" (typo ?)
[Tool] Flummery v0.3.7.5
edit:
Running a little behind where I wanted to be so I thought I'd tease the next release...
[Tool] Flummery v0.3.7.5
Oh sorry thought you posted the program already :)
[Tool] Flummery v0.3.7.5
[Tool] Flummery v0.3.7.5
I am just glad you are inches away instead of miles.
[Tool] Flummery v0.3.7.5
Changelog:
* FBX Export: Vertex colours now exported
* FBX Export: Fixed duplicate node name collisions
* Save as > Vehicle: Completely overhauled. Now generates a minge file and a CarMODgeddon ready ZAD.
* Save as > Level: Completely overhauled. Now generates a minge file and a CarMODgeddon ready ZAD.
* View > Preferences: You can configure your Author name and website (used in minge files) on the Misc tab
* Tools > Carmageddon 2 > Process for Carmageddon Reincarnation: Applies all the necessary steps for converting an asset from C2 to C:R
[Tool] Flummery v0.3.7.5
- farellfoxx
- driver
- Posts: 87
- Joined: Fri May 22, 2015 4:03 am
[Tool] Flummery v0.3.7.5
Edit: Is this the right thread for map shots?
Sunset by the old SCI-gn
So much work to be done...
[Tool] Flummery v0.3.7.5
[Tool] Flummery v0.3.7.5
And there are powerups in the map !!! Cool.
And just in case you are surprised I was using the Junkyard template from your site.
- farellfoxx
- driver
- Posts: 87
- Joined: Fri May 22, 2015 4:03 am
[Tool] Flummery v0.3.7.5
By that I meant Powerups; peds and such. Even the AI just sat there; I think they need a starting point. I used the C1 to C2 conversion from ToxicRagers.Errol wrote:Manual placement?
Edit: You ARE Errol; of TR... I feel dumb now...
[Tool] Flummery v0.3.7.5
Unfortunately X-Ray and I didn't port the powerup positions from C1 to C2 when we made the level ports otherwise they'd automatically be configured for you (as starbuck just discovered with a C2 map conversion).
Peds are easy as pie (take a look at pedfile.xml) but they might not begin spawning until a weird bzn file is generated. Let me know if this is the case and I'll take a crack at reverse-engineering that file format. And yeah, the AI won't move until you start configuring the routes. They're a lot more straight forward compared to C1 and C2, I may even be able to knock something together to auto-convert them at some point.
Let me know if you run into any problems (and I'll fix the sun being too red in the next build (and the sky not existing))
[Tool] Flummery v0.3.7.5
It could also be mixed with the version I unzipped last week. I would have to find out which one.
Anyway here is the file in C2 format http://s000.tinyupload.com/index.php?file_id=01394616930636833634 in case you want to look and see why.
The Acid Reign one didnt seem to have powerups. Could be cause I think Carma1 had a different text file format for modification ?
- farellfoxx
- driver
- Posts: 87
- Joined: Fri May 22, 2015 4:03 am
[Tool] Flummery v0.3.7.5
Thanks for your help; haven't seen anything yet, although I do have a few other (Car-Related) problems...Errol wrote:Indeed I am! I should really update that site.Unfortunately X-Ray and I didn't port the powerup positions from C1 to C2 when we made the level ports otherwise they'd automatically be configured for you (as starbuck just discovered with a C2 map conversion).
Peds are easy as pie (take a look at pedfile.xml) but they might not begin spawning until a weird bzn file is generated. Let me know if this is the case and I'll take a crack at reverse-engineering that file format. And yeah, the AI won't move until you start configuring the routes. They're a lot more straight forward compared to C1 and C2, I may even be able to knock something together to auto-convert them at some point.
Let me know if you run into any problems (and I'll fix the sun being too red in the next build (and the sky not existing))
I still don't know how to place wheel nodes in Flummery. I even looked over an existing car from Reincarnation; and I cannot seem to understand it!
Did the menu names change? Am I that stupid? (Probably... I bet it's really simple.) I'm using 3.7.2. I know that deleting the wheel model is required and it loads separately; but...
[Tool] Flummery v0.3.7.5
While I am at it is FBX export supposed to include textures too ? Cause in MAX 2015 I get just the model.
[Tool] Flummery v0.3.7.5
Flummery generates basic, default materials (the .mt2 files), you'll need to go through them and configure them as appropriate (this is currently done using notepad/text editor of your choice).starbuck wrote:OK Minor bug. I crashed into the "blank" side of a double sided texture in Junkyard. It was that long concrete wall. The "city" side was blank. No big deal but you owe me a new car :)While I am at it is FBX export supposed to include textures too ? Cause in MAX 2015 I get just the model.
When exporting to FBX it will generate .dds files for every texture referenced by the FBX. Although there is little point exporting to FBX if you're going to be using Max. Just use trents scripts to import directly.
[Tool] Flummery v0.3.7.5
The m ost I ever got was it failed at "xmlDoc.load (folder+materialName+".MT2")" even though the names of all the files are in the base folder
I was hoping to use some program to export it to so I can for example fix those walls on both sides.
To use notepad what would I do ? Open the FBX file and for example change the letters mt2 to something else.
[Tool] Flummery v0.3.7.5
I think you can make them double-sided by just adding "" on the line below "" but I'm not 100% sure. It has been over a year since I fiddled with materials.
[Tool] Flummery v0.3.7.5
Your suggestion though made the textures passable from the blank side though :)
But I will look around and find one to look at later since they are text editable.
[Tool] Flummery v0.3.7.5
Let us say that you've opened your Carma 2 act file, clicked "Process for Carmageddon Reincarnation" and "Saved as Level".
In that folder you've just saved to are a lot of files, many of them will be .mt2 files. These are the files you can open in notepad and these are the files you need to edit to make the materials do what you want.
I'm not going to try to support Trent's maxscripts as I don't have 3ds max.
You say you get an error when "importing the CNT file". Which CNT file?
- farellfoxx
- driver
- Posts: 87
- Joined: Fri May 22, 2015 4:03 am
[Tool] Flummery v0.3.7.5
How do I make Wheels? As in: the model of a wheel; and the setup for it to be 'attached' to the car. I've got the placeholders... now I need wheels.
[Tool] Flummery v0.3.7.5
Sorry chap, I just write the tools!
[Tool] Flummery v0.3.7.5
Feel free to send me a PM :)farellfoxx wrote:This is going to sound similar to another question; but it isn't, technically.How do I make Wheels? As in: the model of a wheel; and the setup for it to be 'attached' to the car. I've got the placeholders... now I need wheels.
[Tool] Flummery v0.3.7.5
After going to "File Save As Level" when I open the level.CNT file I get this http://tinypic.com/view.php?pic=2dakoli&s=8#.VauTSK3sZkp. In both Flummery and Trents scripts. No offense intended if it was only Trents scripts I would probably start a "How does Trents scripts work" thread. But I read somewhere that he is using your code to make his scripts, pretty sure that was how he worded it.
I cannot reopen that file unless I go back to to square one "open Carma2 file". Anything created from Flummery just seems like a wasted file except when opening the track in CR. At least texture wise.
There is no way for example to save a "Flummery file" with textures that existed after the "File Save as level" action.
So if it were for example a file that I created I would always have to go back to square one. Feels like the days when we had to go to "ASCtoASE" or when we were using Bemax.
There is no way to continue where you actually left of I guess is what I am saying.
hope that makes sense I just woke up. Wish I could be in the same mode I was last nite. :)
[Tool] Flummery v0.3.7.5
Screenshot any error you get (preferably with the details tab expanded) and also pastebin your flummery.log.
Cheers.
[Tool] Flummery v0.3.7.5
Log so far is empty. gotta go.
[Tool] Flummery v0.3.7.5
So I did all the stuff and saved the level file.
I then opened the CNT WITH the original map in the window , so now I got two maps. The CNT file opened fine.
But when I hit New and started a fresh version of Flummery I got this...
http://s000.tinyupload.com/index.php?file_id=79969223499798414042
The Flummery log and the image of the error are inside the zip. And the map is in there too.
FYI This does NOT include the redtop.mt2 file I tried editing like we discussed. I removed that file and started from scratch.
Check who’s online
Users browsing this forum: No registered users and 27 guests